Jaw Crusher Broken Curved Moving Extrusion Mode

Jaw Crusher

Jaw crusher machine structure is mainly composed of frame, eccentric shaft, a big belt wheel, flywheel, Hubei, side guard plate, a bracket, bracket back seat, a gap adjusting screw, a reset spring, fixed jaw plate and flow jaw plate, etc., which toggle plate also played the role of insurance.
Hongke jaw crusher of crushing machine for curved extrusion type electromotor drive belt and belt wheel, the eccentric shaft so that the movable jaw movement, when the movable jaw rises elbow board and the movable jaw angle becomes large, thus promoting the movable jaw plate to the fixed jaw plate, close to. At the same time, the material is extruded, rubbing, grinding and other multiple broken; when the movable jaw down, elbow board and the movable jaw angle becomes small, the movable jaw plate on the pull rod, a spring leaves the fixed jaw plate, this time has been broken material from the crushing chamber outlet, followed by electromotor continuous rolling crusher jaw periodic crushing and discharging, realize batch production.